Bentonite Geosynthetic Clay Liner (GCL)

Model NO.: GCL Ceiling Tile Shape: Roll Thickness: 4.0mm Surface Treatment: Film Coated Certification: CE Usage: Outdoor Trademark: HONGXIANG Origin: Made in China Type: Waterproof Roll Material Material: PP Ceiling Tile Type: Polyester Function: Anti-static Color: White Application: River Bank Specification: CE SGS HS Code: 5603119000 High quality bentonite waterproof pad(GCL)Bentonite composite waterproof blanket (GCL) is a new type of geosynthetics. It is inflated by a natural sodium bentonite waterproof blanket spraying to protect the work surface above graded shotcrete waterproof blanket above the work surface protection bentonite particles and the corresponding mixing additives for raw materials, acupuncture technology and equipment, the bentonite particles fixed between the geotextile and plastic woven blanket made of waterproof membrane. High quality bentonite waterproof  pad (GCL)Specification:   Unit weight≥4000g/sqm, width4m~6m
Made from two layers geotextile with natural sodium in the centre


  Bentonite Geosynthetic Clay Liner :   1.Introduction:    Geosynthetic Clay Liners (GCLs) are hydraulic barriers made of clay bonded to a single geosynthetic layer or to multiple geosynthetic layers. Because of its low permeability, swelling capacity and relative abundance, natural sodium bentonite is the preferred clay component of GCLs.
A wide range of materials, including geotextiles and geomembranes, are used to carry and encapsulate the clay. Also, they provide the product with structural support.

GCLs are used primarily as substitutes for compacted clay liners (CCLs), providing significant advantages in cost, ease of installation, and performance.  High quality bentonite waterproof  pad (GCL) feature: 1)Improved leakage performance 2)Permanent waterproof performance 3)Simple construction and short time limit for project 4)Not influenced by air temperature 5)A kind of green material and good to environmental protection 6)More versatile than compacted clay 7)Increased airspace and liner efficiency 3.Usage: 1)Slope protection 2.Features:    Self Healing with consistent thickness throughout provides a higher degree of confidence Fast and easy to install Low thickness High shear strength due to the bentonite being captured within the needle-punched fibres Uniform distribution of bentonite within the GCL is maintained throughout The material is fully needle-punched composite which contains highest quality sodium bentonite between two layers of geotextile. The purpose of the GCL is for the bentonite to swell when hydrated and form a natural hydraulic barrier   3.End Use Application:    Surface Impoundment

Secondary Containment

Landfill   GCL for Construction and Real Estate  

item		GCL-NP	GCL-OF	GCL-AH
g/m2		≥4000	≥4000	4000
ml/2g  swell index		≥ 24	≥ 24	≥ 24
g/100g		≥ 30	≥ 30	≥ 30
N/100mm tensile strength		≥ 600	≥ 700	≥ 600
Elongation at max load		≥ 10	≥ 10	≥ 8
N/100mm peel strength	Nonwoven geotextile and woven geotextile	≥ 40	≥ 40	≥ ---
	PE geomembrane and Non-woven geotextile	----------	≥30	----
m/s permeability		≤5.0*10-11	≤5.0*10-12	≤ 1.0*10-12
Resistance hydraulic pressure		0.47Mpa,1h 0.4Mpa,1h,no leakage	0.6Mpa,1h 0.6Mpa,1h,no leakage	0.6Mpa,1h0.6mpa,1h,noleakage
ml   fulid  loss		≤ 18	≤ 18	≤ 18
Durability of  bemonite(Ml/2g)		≥ 20	≥ 20	≥ 20

  NOTE;GCL-NP Needle punched process GCL GCL-OF Neddle punched and coated process GCL GCL-AH:Viswcose pmcess GCL

Area	Application of Geosynthetics
Hydraulic	Lagooning and Water Treatment, Ornamental Ponds, Golf Courses Aquaculture and Desalination Water LagoonsTanks, Reservoirs, Liquid WasteFloating Cover SolutionsDrainage and FiltrationShading Cover Solutions
Environment	Tailing ponds, Leach mining,Landfills,Landfill Capping,Protection against corrosion,Vertical Barriers
Civil Works	Erosion Control, Secondary Containment, Tunnels,Linear and Surface Works,Consolidation of Margins,Soil Reinforcement,Soil Separation.
Building	Parkings,Roofing,Soundproofing building

Questions and Answers:
Q: Can you accept sample order?
A: Yes, we accept samples with little and reasonable charge.
Q: What is your MOQ?
A: Normally, 5000 m2 per order.
Q: What is your delivery time? Can we short it in 7 days or less?
A: 7 days for sample, 20-25 days for mass production.
Q: What is your payment terms?
A: T/T (Bank surcharge 50$/order), Paypal (3% surcharge), Western Union or 20% deposit 80% L/C.
Q: How can I get my order?How can I know you sent the goods.
A: We will send you the goods by UPS, DHL, Fedex, Oversea Shipment or other forwarder, all with tracking number or B/L.
Q:How about your quality?
A: Try a small order, you will have your own judgment!

Contact us if you need more details on Geosynthetic Clay Layer. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Gcl、Building Material. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Geosynthetic Clay Liner